• Fast and easy to install thanks to the foundation box that can be assembled on site without welding
• Hydraulic control unit integrated
• Emergency operation by unlocking key available in three different shapes
• PLUG & PLAY connection between bollard and control panel
• The embedded un-lock device is equipped with waterproof stainless steel plug
• On request it is possible to have the standard tringular insert to allow manual release of the bollard to emergency vehicles (cod. HY.REL)
• The un-lock system is available in 3 different shapes (A/B/C)
Product specifications: HYDRA500/I LED
Cylinder height | 500 mm |
Cylinder diameter | 200 mm |
Raising time | 5 s |
Lowering time | 5 s |
Power Supply | 230 Vac / 50/60 Hz |
Absorbed current | 8 A max |
Standby consumption | 10 W |
Pump delivery | 4.5 l/min |
Max oil pressure | 17 bar |
Overload cut-out | 150 °C |
Capacitor | 31.5 μF |
Daily cycles | 1,000 |
Impact resistance | 11.000 J |
Breakout resistance | 180.000 J |
Operating temperature | -15°C / +70°C |
Protection level | IP68 |
Weight (without foundation box) | 79/81 kg |
|
HY.CELL1 Power supply: 230 Vac - 50/60 Hz / Small size / Embedded Radio Receiver / Connection between the control panel and the bollard through PLUG & PLAY cable with connector, no special restrictions with regard to the distance between the central and bollard / Not prepared for the sensor HY.FC or traffic lights |
|
HY.CELL2 Power supply: 230 Vac - 50/60 Hz / Small size / Embedded Radio Receiver / Connection between the control panel and the bollard through PLUG & PLAY cable with connector, no special restrictions with regard to the distance between the central and bollard / It can manage up to two bollards / Master / slave configuration for systems with more than 2 bollards / Requires CP.TL and HY.FC for the management of any traffic light |
|
HY.LED Top with LED lights supplied as optional (already embedded in the bollards HYDRA 500/I LED and HYDRA 500/I VA.LED). |
|
HY.VALED Top with LED lights + Electricvalve for automatic lowering in case of power failure. Supplied as optional (already embedded in bollard HYDRA 500/I VALED). |
|
HY.TERM Thermostat for cold areas. |
|
HY.FC Status proximity sensor. For use with central HY.CELL2. Necessary if you use traffic lights TL2, TL2FR, TLC2 and TLC2B. |
|
HY.BUZZ [Warning buzzer (accessory supplied pre-assembled). |
|
KTOOLS Set of installation tools. |
|
CA500A Foundation box in steel with cataphoresis treatment for VIGILANT 500 / HYDRA 500. Quick assembly with screws. |
|
TOP20 Cover for foundation box. |
|
CH05/10/15/20/25 Cable with connector L= 5/10/15/20/25 m. Longer cables can be supplied on demand. |