CAESAR 200/600/I PLUS
External cylinder diameter
200 mm
Above-ground height
600 mm
Cylinder thickness
5 mm
CAESAR 200/600/I PLUS
• Automatic electromechanical bollard 24 Vdc, height of 600 mm, with a cylinder thickness of 5 mm
• Cataphoresis treatment and “Graphite Black” quartz painting painting or a brushed stainless steel AISI316 tube
• CAESAR PLUS version equipped with patented custom key manual release for raising and lowering the bollard in the absence of power
• Integrated LED lights on the cylinder and a control panel capable of managing two bollards simultaneously
• Foundation box compliant with EN124 standard (25T) for the passage of light vehicles
• Locking mechanism in the raised position in case of power failure
• Accessories available: heater, buzzer, and battery kit
• Integrated obstacle detection system
• Adjustable speeds for raising, lowering, and slowing
| Cylinder height | 600 mm |
| Cylinder diameter | 200 mm |
| Cylinder thickness | 5 mm |
| Raising time | 6 s |
| Lowering time | 5 s |
| Power Supply | 230 Vac - 50/60 Hz (control panel with different voltages available on request) |
| Power consumption | 220 W |
| Electromechanical actuator | 24 Vdc |
| Load index (EN124) | C250 (25 tonnes) |
| Lowering cycle in case of power failure | Manual release |
| Obstacle detection during the rising cycle | Integrated |
| Daily cycles | 500 |
| Impact resistance | 10.000 J |
| Breakout resistance | 110.000 J |
| Operating temperature | -40°C ÷ +60°C [GL.HEAT required for temperatures below -10°C] |
| Protection level | IP67 |
| Actuator protection level | IP68 |
| Weight (without foundation box) | 56 kg |
|
ROMA.CPControl panel for 2 electromechanical bollards 24 Vdc |
|
GL.BUZZBuzzer. Requires CP.BL accessory. |
|
GL.HEATHeater for bollard, active below 5°C. |
|
CA. 200/600 EFoundation box for CAESAR 200 /600 (can be shipped separately). |
|
EL.TOP200Cover for foundation box CA200/600 E or CA200/800 E. |
|
GL.CABLE10Cable FG10 10x1.5 mmq. |
|
PO10Drainage pump. |